YOUR SOURCE FOR STEPPER MOTOR DRIVER AND CONTROLLER

Welcome to our website!

Vexta PV264-02BA-C1 with ENCODER

Be the first to review this product

Availability: Out of stock

Regular Price: $144.00

Special Price $59.00

Quick Overview

NEMA 23 Vexta PV264-02BA-C1
6-wire stepper motor from Oriental Motors
1.8deg (200 steps/revolution) with holding torque of 150 oz-in (bipolar).
Double shaft with HEDS-5645 Avago quadrature ENCODER.

Vexta PV264-02BA with Encoder 1

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Vexta PV264-02BA with Encoder 3
  • Vexta PV264-02BA with Encoder 1
  • Vexta PV264-02BA with Encoder 2
  • Vexta PV264-02BA with Encoder 4

Details

This is one of a kind motor and encoder deal!
NEMA 23 (size 60mm) Vexta PV264-02BA-C1, 6-wire stepper motor with 1.8deg resolution and holding torque of 150 oz-in (bipolar-series).
The PV series features enlarged rotor and magnets, providing significant increase in torque, which on average is 1.5 times higher than a standard motor torque.
Due to increased size of the rotor the frame is slightly larger than typical NEMA 23 motor, reaching 60mm (or 2.36 inch). However, it still fits perfectly in any NEMA 23 mounting bracket as the mounting holes match the standard pattern and diameter.
Very low inductance makes this motor a perfect choice for higher speed operation.
Double shaft with flats on both sides for easy mounting of the flex coupler and encoder.

We sell this motor with preassembled encoder on back side.
The retail value of the motor (without encoder) is $93. For detailed specification click here: PV264-02BA
We have also a compiled data sheet if you want to use this motor with our drivers - Setup PV264-02BA-C1

Motor comes with short 4.5 inch wires terminated with Molex 6-pin Micro-Fit panel-mount connector. Molex P/N 43020-0600.
The mated Micro-Fit connector is P/N 43025-0600 and is available from Digi-Key (P/N WM1785-ND).

The quadrature encoder is manufactured by Avago.
It features solid, metal (not film) codewheel and three channels - A, B and additional Index.
Very easy to use, with TTL compatible outputs and single 5V supply. With 400 CPR, this encoder is a perfect match for any 200 steps/revolution (1.8 deg) motor, this way your controller needs to calculate only very simple numbers.
The additional Index channel generates index pulse for each full rotation of the codewheel.
This encoder alone is sold for $51 by Digi-Key.
The complete data sheet for Avago HEDS-5645 H-06 encoder is available here HEDS_Encoder_Avago.pdf
We provide FREEE matching connector for encoder. This is 5-pin IDC type connector, easy to install without soldering. This motor-encoder unit can be easily implemented in closed loop system, just add appropriate controller.

We have very limited quantities of these motor-encoder sets left so please hurry up!

Additional Information

NEMA size 23
Step Angle 1.8
Holding Torque 101 - 200 oz-in ( 71 - 140 Ncm )

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.