This is a Brand New motor from Oriental Motors. Here are some details: - manufacturer: Oriental Motors - origin: made in Japan - size: 56mm, NEMA 23 - step angle: 1.8 deg ( 200 steps/revolution) - holding torque: 125 oz-in (0.88 N-m) unipolar / 176 oz-in (1.24 N-m) bipolar-series - voltage: 24V unipolar - current: 0.34A unipolar - leads: 6 wires 12" long Data sheet is available from here: PH268-23 Please notice, the pdf shows one page and two models are circled. These numbers don't apply to the motor you are buying. The correct model number is just below and it says PH268-23 (under Single Shaft column). NOTICE: this motor is rated 24V/phase. It is perfect match for older and low current drivers as it requires only 0.34A/phase.
|Holding Torque||101 - 200 oz-in ( 71 - 140 Ncm )|