5017_AMP

SIZE 17 1.57" CONVENTIONAL   ELECTRICAL RATINGS
  SQ   ROTARY HYBRID STEPPING MOTOR 1.8
Model Number Number of Leads Connection Phase Voltage (VDC) Phase Current (A) Phase Resistance (ohm) Phase Inductance (mH) Holding Torque (oz-in) Suitable Interinar Driver
BSD-01C BSD-01V2 BSD-02 (LH)
USE Vref (V) USE Vref (V) USE Vref (V)
5017-006 6 bipol-series 5.70 0.67 8.40 12.40 21.20 - - X 3.64 X 1.07
unipolar 4.00 0.95 4.20 3.10 15.00 - - - - X 1.52
5017-007 6 bipol-series 13.60 0.28 48.00 64.00 21.20 X 1.52 X 1.52 X 0.45
unipolar 9.60 0.40 24.00 16.00 15.00 X 2.18 X 2.18 X 0.64
5017-008 6 bipol-series 17.00 0.11 150.00 180.00 14.10 X 0.60 X 0.60 X 0.18
unipolar 12.00 0.16 75.00 45.00 10.00 X 0.87 X 0.87 X 0.26
5017-009 6 bipol-series 8.50 0.57 15.00 26.00 31.10 X 3.10 X 3.10 X 0.91
unipolar 6.00 0.80 7.50 6.50 22.00 - - - - X 1.28
5017-010 6 bipol-series 17.00 0.28 60.00 112.00 31.10 X 1.52 X 1.52 X 0.45
unipolar 12.00 0.40 30.00 28.00 22.00 X 2.18 X 2.18 X 0.64
5017-011 6 bipol-series 33.90 0.14 240.00 420.00 31.10 - - - - - -
unipolar 24.00 0.20 120.00 105.00 22.00 X 1.09 X 1.09 X 0.32
5017-012 6 bipol-series 5.70 0.85 6.60 11.20 42.40 - - - - X 1.36
unipolar 4.00 1.20 3.30 2.80 30.00 - - - - X 1.92
5017-013 6 bipol-series 8.50 0.57 15.00 23.20 42.40 X 3.10 X 3.10 X 0.91
unipolar 6.00 0.80 7.50 5.80 30.00 - - - - X 1.28
5017-014 6 bipol-series 17.00 0.28 60.00 104.00 42.40 X 1.52 X 1.52 X 0.45
unipolar 12.00 0.40 30.00 26.00 30.00 X 2.18 X 2.18 X 0.64
All motors listed in this table are manufactured by Applied Motion Products                
All drivers listed in this table are manufactured by Interinar Electronics www.interinar.com            
This document was prepared by the Interinar Electronics to assist in selecting correct driver.
We have used our best effort in preparing this document. We make no representations or warranties with respect to the accuracy or completeness of the contents of this document and specifically disclaim any implied warranties of fitness for a particular purpose. We shall not be liable for any loss of profit or any other commercial damages.