Minebea 23KM-K102-P1V is a 1.8deg (200 steps/revolution) NEMA 23 step motor with 168 oz-in holding torque ( 118 N-cm ).
This motor has 6-pin connector but only 4 pins are internally connected so bipolar driver is required.
Will NOT work with unipolar driver.
The mating housing with standard 0.100" pitch and 6 crimp contacts are supplied with motor (crimping tool required).
This is High-Torque motor with special oversized shaft diameter for demanding applications.
The shaft is 0.315" diameter ( 8.0mm).
Motor is rated 3.0A per phase and has a very low inductance 2.5mH for higher speed operations.
Will perform well in microstepping modes and in full-step mode.
Data sheet and connection diagram: Minebea 23KM-K102-P1V Data Sheet
Manufactured by Minebea Motor Manufacturing Corporation.
Matching driver - see BSD-071
|Holding Torque||101 - 200 oz-in ( 71 - 140 Ncm )|